How to Reset a Maytag Washer

If you have a Maytag washer, you may find that you need to reset it if it isn’t working properly or you want a fresh start. Sometimes washing machines can start to not run correctly and need to be reset as a way to solve the issue.

This is a very simple way to give your washer a refresh, so that it can start to work the way that it is supposed to. Anyone with a washing machine should consider doing this yearly or a few times a year, no matter what washer they happen to have.

Keep reading to find out exactly how to reset a Maytag washer the easy way.

How Do I Reset My Maytag Washer?

If you need to reset your Maytag washer, there is a very simple way to do this than anyone can do in just a few minutes. You will need to disconnect the power for three minutes so that it does a reset of the system.

Disconnecting the power for three minutes allows the electrical charge to the machine to dissipate, allowing a reset. This is a very simple way to fix the issue without having to really do anything manually.

The washer does everything itself and should be officially reset once you connect the power again, allowing the washer to turn on. If that does not happen, you can do this again, only leave it disconnected for ten minutes.

If that does not work, there is another method you can try, you can do this by holding down the Spin and Soil button. Hold these buttons for ten seconds, and a countdown should begin on the display console.

Once the countdown has ended, the unit should be reset successfully. One of these methods should work for you if you need to reset your Maytag washing machine.

Resetting your washing machine is a great option to start fresh and remove any settings. This way, you can set it up all over again the way that you want it to work.

How Do I Put a Maytag Washer In Diagnostic Mode?

If you are having issues with your Maytag washer, you may want to turn it to diagnostic mode to locate the issue. This is a great option if resetting your Maytag washer doesn’t completely solve any issues that you were having.

To do this, you need to follow these steps:

  • Turn the washer control dial 3 full rotations to the left
  • Rotate the same dial 3 clicks to the right
  • Rotate it one click to the left
  • Rotate one click to the right

This seems a bit complex, but you can try it several times until you do it successfully. Just make sure to allow for about a second between each rotation and not any longer.

Diagnostic mode is a great way to troubleshoot any issues your washer is having. This is something that most washing machines have so that you can locate any issues preventing them from working.

This is the best thing to do if resetting your washer didn’t seem to work.

Why Is My Maytag Washer Not Starting?

One common issue that people have with Maytag washers is that they will randomly refuse to start. This is a common complaint, but it is usually caused by a very simple issue.

If you are trying to do laundry, but your Maytag washer isn’t starting, look at the control panel to see if the right settings are chosen. It is very common for people to find that certain settings are chosen that interfere with each other.

That or the machine is set with the control lock feature, preventing it from starting. This is a feature that every washer has and can easily be activated by mistake.

This locks the machine’s functions, preventing it from starting the load of laundry. If this is the case, all you need to do is turn off the control lock setting to start the load.

If that isn’t the issue, you could always try to rest the washer and start over again to see if that gets it going like usual.

How Can I Reset My Maytag Washing Machine?

If you need to reset your Maytag washing machine for any reason, this is incredibly simple to do. All you need to do is disconnect the washer for three minutes and reconnect it, this should create an automatic reset.

Alternatively, you may need to hold down the Soil and Spin buttons until a countdown begins on the panel. Once this happens and ends, your machine should be reset automatically.

Both of these options are very effective, and if one doesn’t do the trick, the other should. You could also try to run a diagnostic test to see what might be causing the issue, this is a bit more complicated but can be done if necessary.

Resetting your washer is a great option if you want a fresh start or if the washer isn’t working as well as it normally does.

Leave a Comment