Experiencing a ring doorbell flashing blue light at your front door can be puzzling.
As the blinking blue circle appears on your Ring doorbell, it’s essential to understand what it indicates and how it connects to the booting process.
Ring doorbells, a crucial component of contemporary home security, require homeowners to be familiar with their signals.
By unravelling the mystery behind the flashing blue light, you can ensure the safety and security of your front entrance, and confidently manage your device’s functionality.
Table of Contents
What Does the Ring Doorbell Flashing Blue Mean?
The light located on the front of the Ring Doorbell serves as a means of conveying device status and error messages through its circular illumination. This feature allows you to gauge the performance of your doorbell without needing to access the Ring app. To decipher the message being conveyed, consider the following factors:
- The steadiness or blinking of the light
- The specific segment of the circle that is flashing
- The pace of the flashing or blinking
1. Intermittent Blue Light (On/Off for 1 second)
An intermittent blue light simply signifies that your Ring Doorbell is in the process of booting or starting up. However, if this continues for an extended period, your Ring Doorbell may be stuck in a boot loop.
2. Circular Blue Light in Motion
A rotating blue light represents a standard doorbell press. When the light revolves in blue, your Ring Doorbell is alerting you of a potential call and will send you notifications.
3. Steady Blue Light
While a spinning blue light signals an incoming call, responding to the call will cause the blue light to become constant. A solid blue light on your Ring Doorbell indicates that the doorbell speaker is active, a connection has been established, and you can listen or speak to the person at your door.
4. Ascending Blue Light
A blue light moving upward indicates that your Ring device is attempting to connect to your home network. This typically occurs during setup, but if it appears when you’re not setting up the device, you may have a Wi-Fi connectivity issue.
5. Quick Blue Light Flashes Followed by White Light
A sequence of flashing lights signifies that your Ring device has undergone a hard reset. You can now proceed with setting up your video doorbell for use once again.
6. Four Blue LEDs Flashing Four Times
If you observe this, there’s no need to worry. Four blue LEDs flashing four times simply mean that your Ring Doorbell setup was unsuccessful. You’ll need to reset and redo the setup, ensuring you follow the steps accurately.
In addition to the above, a Ring Pro flashing blue while charging is another form of device communication. Ring Pro devices may begin flashing during the installation process, which is entirely normal and indicates the internal power is charging.
For the Ring Doorbell Pro, a gradually filling circle of blue LEDs serves as a charging meter. The blue light will switch off once the device is fully charged, after which you can complete the setup process.
7. Continuous Blue Flashing Light on a Ring Doorbell
As mentioned earlier, a flashing blue light that should only last a moment may persist for an extended period. In such cases, your Ring Doorbell might be experiencing a problem that prevents it from functioning, such as being stuck in a boot loop.
Resetting your Ring Doorbell is the most viable solution.
To hard reset your Ring device:
- Find the setup button on your Ring device, which is either orange or black and located at the back or on the right side.
- Press and hold the button for at least 15 seconds.
- Release the button after 15 seconds, and you will see the front light flashing a few times, indicating your Ring Doorbell is resetting.
- Allow 5 minutes for the device to reset to factory settings.
- Press the orange/black button again to enable setup mode.
In some instances, this method resolves the issue of a continuously flashing blue light on a Ring Doorbell.
However, if it doesn’t work, it is advisable to contact Ring Customer Support.
Additionally, verify whether your device is still under warranty, as there’s a possibility that your Ring Doorbell is defective and requires replacement.
Ring blue light flashes during setup (6 Steps To Follow)
Step 1: When setting up your Ring device, the blue light should spin around. If it starts flashing instead, pay attention to what type of flashing pattern it is displaying.
Step 2: If the blue light flashes in a pattern moving upwards, it means that your Ring device is attempting to connect to your Wi-Fi network. Wait for the connection to be established.
Step 3: If only the top half of the blue light flashes, it means that you’ve entered the wrong Wi-Fi password during setup. Re-enter the password correctly to complete the setup.
Step 4: Once the setup is complete, you’ll see a white circle flashing four times after the blue light flashes four times. This indicates that your Ring device is ready to use.
Step 5: Make sure you have a steady and strong Wi-Fi connection for your Ring device to function properly. A poor or unstable connection can lead to delays in the device’s functionality and even affect its overall performance.
Step 6: Configure your Ring device further, such as setting up motion detection or notifications, to get the most out of your device and ensure that your home or office is secure.
Other Issues that Affect Ring Doorbell
In addition to the flashing blue light issue, there are other common problems that can affect your Ring Doorbell.
One of the most common issues is related to Wi-Fi.
If you experience problems such as not receiving notifications, hearing a sound when you push the button, or the Ring Doorbell’s circular light glowing in soft white, your device may have lost its Wi-Fi connection.
How to Know if You Have Weak Wi-Fi Signal
If you have problems with your Wi-Fi signal, it can lead to poor video quality recordings, delayed or no notifications, and Live View not connecting or taking a long time.
To improve your Wi-Fi signal, try moving your router closer to the device or use a Wi-Fi extender to boost the signal.
Power Issues
Power issues are also a common problem with Ring Doorbells.
Signs of a power issue include the device shutting off, losing connection to Wi-Fi, Live Events always freezing, or the doorbell not properly ringing.
If you experience any of these problems, try checking your power source or consult Ring support for assistance.
Final Words
If you encounter a Ring Doorbell flashing blue during setup, it usually indicates that your device is connecting to your Wi-Fi network.
A stable Wi-Fi connection is essential for the proper functioning of your device.
However, if you face any other problems such as issues with booting, Wi-Fi connectivity, power, or any other smart video doorbell related issues, there are a few ways to fix them.
Try restarting your router or moving it closer to the device, checking your power source or contacting Ring support for assistance.
Keeping these tips in mind can help you troubleshoot your Ring Doorbell and ensure your home remains secure.
