If you have a Whirlpool washer that is not moving from the sensing setting, you probably want to know what is going on. This is a common issue that many people might experience, whether they have a Whirlpool washer or another brand.
This can be frustrating as you are not able to wash your laundry, and it is stuck in the machine with a bunch of water. The good thing is that there are several things that clouds are causing this that you can troubleshoot.
Keep reading to find out why your whirlpool washer won’t go past the sensing cycle and what to do about it.
Table of Contents
Why Is My Whirlpool Washer Stuck on Sensing?
A Whirlpool washer can become stuck on the sensing setting for several reasons, this includes things like a faulty water inlet valve or a faulty shift actuator. These are just two faulty issues that could cause your washer to stop working correctly.
Other things that could cause this include:
- Faulty drive motor
- Faulty main control board
- Too large a load
- Too small a load
There are several mechanisms that could become faulty purely due to usage that the washer has been put through. Things become worn out or plugged up, causing issues with the entire appliance.
A Whirlpool washer should only be sensing a load of laundry for 2 to 3 minutes. If this goes on for longer, there is most likely something wrong with the washer or the settings.
Many of these issues can be resolved by trial and error, but you may even need to call a professional for help. Something like the inlet valve could become worn out and unable to do its job, requiring a replacement.
The easiest things to fix are if there are too many clothes in the washer or not enough. Too many clothes and the washer will struggle to add enough water. Causing it to stay in sensing mode as it senses too many clothes and not enough water.
If you have too small of a load, it may not sense anything in the machine, causing it to continue to try to sense. That or, it may not know how much water to add if it doesn’t sense clothing.
How Do I Get My Whirlpool Washer Off Sensing Cycle?
If your washer is stuck on the sensing cycle, the best thing to do is to reset it. This is a solution that anyone can do without any experience or fear of messing up their Whirlpool washer.
There are several things that could be wrong, but it is always best to try out the easiest method first to see if that works. If resetting the washer ultimately;y fails to fix the issue, there may be something more serious going on.
Many serious issues that could cause your washing machine to stay on the sensing setting are due to faulty mechanisms. Things get worn out over time and may need to eventually be replaced if you want the machine to continue to work.
If this ends up being the case, it is best to hire a professional as they will know exactly what to do. Your warranty may even cover repairs like this or provide a new washer depending on the coverage.
How Do I Reset Whirlpool Washer?
If you are trying to do laundry, but your Whirlpool washer is stuck on the sensing cycle, you should try to reset it. Do this first if it has been sensing for over 10 minutes, which is a clear sign that something is wrong.
The first thing you need to do is cut off the power to the washer by unplugging it. Do this and leave the machine for 3 to 5 minutes before plugging it back in.
If it is still getting stuck on sensing, try to unplug it again, only leave it for 15 to 20 minutes this time. If this doesn’t work either, you may need to call a professional to help figure out what the issue is.
It is a good idea to leave your washer unplugged for 15 to 20 minutes every so often as a way of regularly resetting it. This can do wonders in helping the machine to work better and have fewer issues.
Why is a Whirlpool Washer Not Moving From Sensing Setting?
If your Whirlpool washer is stuck on the sensing setting when you try to do laundry, there is most likely an internal issue. This could be a faulty drive motor, main control board, or shift actuator.
Though you can also try to reset it to see if that does anything, this is easy to do and might solve minor issues. If resetting the washer doesn’t work, it is best to have a professional examine your machine.
They will be able to pinpoint the issue and help you figure out where to go from there. Sometimes mechanisms become worn out or damaged and need to be replaced before you can use your Whirlpool washer.